Schema Tinnitus-270-500.xsd

schema location:	..\Tinnitus-270-500.xsd
attribute form default:	unqualified
element form default:	qualified
targetNamespace:	http://www.himsa.com/measurement/Tinnitus/500

Elements	Complex types	Simple types
TinnitusMeasurementData	Bandwidth_Type	SignalOutput_Type
	Intensity_Type	SignalUnit_Type
	MeasurementConditions_Type	TinnitusInhibitionSucess_Type
	MeasurementEquipment_Type	TinnitusMatchSucess_Type
	MeasurementFrequencyPoint_Type	TinnitusPerceptionLocation_Type
	MeasurementIntensityPoint_Type	TinnitusTemporalCharacteristic_Type
	MinimumMaskingLevel_Type	Transducer_Type
	ResidualInhibition_Type
	Signal_Type
	TinnitusLoudnessMatch_Type
	TinnitusMeasurementNotes_Type
	TinnitusPitchMatch_Type

element TinnitusMeasurementData

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
properties	content  complex
children	TinnitusMeasurementNotes TinnitusMeasurementEquipment TinnitusPitchMatch TinnitusLoudnessMatch MinimumMaskingLevel ResidualInhibition
attributes	Name   Type   Use   Default   Fixed   annotation Version derived by: xs:integer required      500   documentation Version of this data standard
annotation	documentation ROOT ELEMENT December 15 2022 See REV history below Important: All XML data must be encoded using UTF-8. For software using this data standard: In order not to waste space in the NOAH database it is not legal to save empty elements. <Element/>The information in this document is subject to change according to the review policies established by HIMSA II. HIMSA II MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OR SUITABILITY FOR A PARTICULAR PURPOSE. HIMSA shall not be liable for errors contained herein or for incidental consequential damages in connection with the supply of, performance of, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No parts of this document may be photocopied, reproduced or distributed to Non-HIMSA member companies. without the prior permission of HIMSA II. REV History: Revision 1: December 15 2022: - First release   Copyright © 2022 HIMSA II  K/S documentation Tinnitus measurements that can be used to quantify subjective tinnitus measurements.
source	<xs:element name="TinnitusMeasurementData">   <xs:annotation>     <xs:documentation>ROOT ELEMENT December 15 2022 See REV history below Important: All XML data must be encoded using UTF-8. For software using this data standard: In order not to waste space in the NOAH database it is not legal to save empty elements. <Element/>The information in this document is subject to change according to the review policies established by HIMSA II. HIMSA II MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OR SUITABILITY FOR A PARTICULAR PURPOSE. HIMSA shall not be liable for errors contained herein or for incidental consequential damages in connection with the supply of, performance of, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No parts of this document may be photocopied, reproduced or distributed to Non-HIMSA member companies. without the prior permission of HIMSA II. REV History: Revision 1: December 15 2022: - First release   Copyright © 2022 HIMSA II  K/S </xs:documentation>     <xs:documentation>Tinnitus measurements that can be used to quantify subjective tinnitus measurements.</xs:documentation>   </xs:annotation>   <xs:complexType>     <xs:sequence>       <xs:element name="TinnitusMeasurementNotes" type="TinnitusMeasurementNotes_Type" minOccurs="0">         <xs:annotation>           <xs:documentation>Notes added to the Tinnitus Measurement</xs:documentation>         </xs:annotation>       </xs:element>       <xs:element name="TinnitusMeasurementEquipment" type="MeasurementEquipment_Type" minOccurs="0">         <xs:annotation>           <xs:documentation>The Tinnitus Measurement Equipment</xs:documentation>         </xs:annotation>       </xs:element>       <xs:element name="TinnitusPitchMatch" type="TinnitusPitchMatch_Type" minOccurs="0" maxOccurs="unbounded">         <xs:annotation>           <xs:documentation>(TPM) Test attempt to determine the frequency best matching the tinnitus</xs:documentation>         </xs:annotation>       </xs:element>       <xs:element name="TinnitusLoudnessMatch" type="TinnitusLoudnessMatch_Type" minOccurs="0" maxOccurs="unbounded">         <xs:annotation>           <xs:documentation>(TLM) Test attempt to determine loudness of the tinnitus</xs:documentation>         </xs:annotation>       </xs:element>       <xs:element name="MinimumMaskingLevel" type="MinimumMaskingLevel_Type" minOccurs="0" maxOccurs="unbounded">         <xs:annotation>           <xs:documentation>The minimum level to mask Tinnitus (MML). Test attempt to determine the lowest level at which a standard band of noise "covered" the tinnitus</xs:documentation>         </xs:annotation>       </xs:element>       <xs:element name="ResidualInhibition" type="ResidualInhibition_Type" minOccurs="0" maxOccurs="unbounded">         <xs:annotation>           <xs:documentation>Tinnitus loudness suppression after exposure to a stimulus</xs:documentation>         </xs:annotation>       </xs:element>     </xs:sequence>     <xs:attribute name="Version" use="required" fixed="500">       <xs:annotation>         <xs:documentation>Version of this data standard </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minInclusive value="500"/>         </xs:restriction>       </xs:simpleType>     </xs:attribute>   </xs:complexType> </xs:element>

attribute TinnitusMeasurementData/@Version

type	restriction of xs:integer
properties	isRef  0 fixed  500 use  required
facets	Kind  Value  annotation  minInclusive  500
annotation	documentation Version of this data standard
source	<xs:attribute name="Version" use="required" fixed="500">   <xs:annotation>     <xs:documentation>Version of this data standard </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minInclusive value="500"/>     </xs:restriction>   </xs:simpleType> </xs:attribute>

element TinnitusMeasurementData/TinnitusMeasurementNotes

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusMeasurementNotes_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	TinnitusPerceptionLocation TinnitusTemporalCharacteristic OtherMeasurementNotes
annotation	documentation Notes added to the Tinnitus Measurement
source	<xs:element name="TinnitusMeasurementNotes" type="TinnitusMeasurementNotes_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>Notes added to the Tinnitus Measurement</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementData/TinnitusMeasurementEquipment

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementEquipment_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	AudiometerMakeModel AudiometerSerialNumber AudiometerLastCalibrationDate
annotation	documentation The Tinnitus Measurement Equipment
source	<xs:element name="TinnitusMeasurementEquipment" type="MeasurementEquipment_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The Tinnitus Measurement Equipment</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementData/TinnitusPitchMatch

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusPitchMatch_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	MeasurementConditions MeasurementPoint MatchingSuccess
annotation	documentation (TPM) Test attempt to determine the frequency best matching the tinnitus
source	<xs:element name="TinnitusPitchMatch" type="TinnitusPitchMatch_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>(TPM) Test attempt to determine the frequency best matching the tinnitus</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementData/TinnitusLoudnessMatch

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusLoudnessMatch_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	MeasurementConditions MeasurementPoint MatchingSuccess
annotation	documentation (TLM) Test attempt to determine loudness of the tinnitus
source	<xs:element name="TinnitusLoudnessMatch" type="TinnitusLoudnessMatch_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>(TLM) Test attempt to determine loudness of the tinnitus</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementData/MinimumMaskingLevel

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MinimumMaskingLevel_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	MeasurementConditions MeasurementPoint MatchingSuccess
annotation	documentation The minimum level to mask Tinnitus (MML). Test attempt to determine the lowest level at which a standard band of noise "covered" the tinnitus
source	<xs:element name="MinimumMaskingLevel" type="MinimumMaskingLevel_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>The minimum level to mask Tinnitus (MML). Test attempt to determine the lowest level at which a standard band of noise "covered" the tinnitus</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementData/ResidualInhibition

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	ResidualInhibition_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	MeasurementConditions SignalIntensity StimulusExposureTime InhibitionTime PulseDuration GapDuration NumberOfCycles InhibitionSuccess PerceptionLocation
annotation	documentation Tinnitus loudness suppression after exposure to a stimulus
source	<xs:element name="ResidualInhibition" type="ResidualInhibition_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>Tinnitus loudness suppression after exposure to a stimulus</xs:documentation>   </xs:annotation> </xs:element>

complexType Bandwidth_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	UpperLimit UpperSlope PlateauSlope LowerLimit LowerSlope
used by	element  MeasurementFrequencyPoint_Type/StimulusBandwidth
annotation	documentation The width of the shaped noise defined by upper and lower limits in Hz.
source	<xs:complexType name="Bandwidth_Type">   <xs:annotation>     <xs:documentation>The width of the shaped noise defined by upper and lower limits in Hz.</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="UpperLimit" minOccurs="0">       <xs:annotation>         <xs:documentation>The upper cutoff frequency of the shaped noise</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="UpperSlope">       <xs:annotation>         <xs:documentation>The slope of the shaped noise from center frequency to upper cutoff frequency</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="PlateauSlope" minOccurs="0">       <xs:annotation>         <xs:documentation>The slope at the center frequency</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="LowerLimit" minOccurs="0">       <xs:annotation>         <xs:documentation>The lower cutoff frequency of the shaped noise</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="LowerSlope">       <xs:annotation>         <xs:documentation>The slope of the shaped noise from center frequency to lower cutoff frequency</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>   </xs:sequence> </xs:complexType>

element Bandwidth_Type/UpperLimit

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The upper cutoff frequency of the shaped noise
source	<xs:element name="UpperLimit" minOccurs="0">   <xs:annotation>     <xs:documentation>The upper cutoff frequency of the shaped noise</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Bandwidth_Type/UpperSlope

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The slope of the shaped noise from center frequency to upper cutoff frequency
source	<xs:element name="UpperSlope">   <xs:annotation>     <xs:documentation>The slope of the shaped noise from center frequency to upper cutoff frequency</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Bandwidth_Type/PlateauSlope

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The slope at the center frequency
source	<xs:element name="PlateauSlope" minOccurs="0">   <xs:annotation>     <xs:documentation>The slope at the center frequency</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Bandwidth_Type/LowerLimit

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The lower cutoff frequency of the shaped noise
source	<xs:element name="LowerLimit" minOccurs="0">   <xs:annotation>     <xs:documentation>The lower cutoff frequency of the shaped noise</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Bandwidth_Type/LowerSlope

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The slope of the shaped noise from center frequency to lower cutoff frequency
source	<xs:element name="LowerSlope">   <xs:annotation>     <xs:documentation>The slope of the shaped noise from center frequency to lower cutoff frequency</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

complexType Intensity_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	Intensity Unit
used by	elements  MeasurementFrequencyPoint_Type/MaskingIntensity MeasurementIntensityPoint_Type/MaskingIntensity MeasurementFrequencyPoint_Type/StimulusIntensity MeasurementIntensityPoint_Type/StimulusIntensity
annotation	documentation Stimulus intensity and unit applied
source	<xs:complexType name="Intensity_Type">   <xs:annotation>     <xs:documentation>Stimulus intensity and unit applied</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="Intensity">       <xs:annotation>         <xs:documentation>The signal intensity </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:fractionDigits value="1"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="Unit" type="SignalUnit_Type">       <xs:annotation>         <xs:documentation>The unit used for the signal.</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element Intensity_Type/Intensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 content  simple
facets	Kind  Value  annotation  fractionDigits  1
annotation	documentation The signal intensity
source	<xs:element name="Intensity">   <xs:annotation>     <xs:documentation>The signal intensity </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:fractionDigits value="1"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Intensity_Type/Unit

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	SignalUnit_Type
properties	isRef  0 content  simple
facets	Kind  Value  annotation  enumeration  HL  enumeration  SL  enumeration  SPL  enumeration  ABS
annotation	documentation The unit used for the signal.
source	<xs:element name="Unit" type="SignalUnit_Type">   <xs:annotation>     <xs:documentation>The unit used for the signal.</xs:documentation>   </xs:annotation> </xs:element>

complexType MeasurementConditions_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	StimulusSignalType StimulusSignalOutput MaskingSignalType MaskingUnit MaskingSignalOutput StimulusTransducerType MaskingTransducerType StimulusTransducerDescription MaskingTransducerDescription StimulusAmplitudeModulation MaskingAmplitudeModulation StimulusBandwidthModulation MaskingBandwidthModulation StimulusFrequencyModulation MaskingFrequencyModulation
used by	elements  TinnitusPitchMatch_Type/MeasurementConditions TinnitusLoudnessMatch_Type/MeasurementConditions MinimumMaskingLevel_Type/MeasurementConditions ResidualInhibition_Type/MeasurementConditions
annotation	documentation Measuring Conditions for each measurement
source	<xs:complexType name="MeasurementConditions_Type">   <xs:annotation>     <xs:documentation>Measuring Conditions for each measurement </xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="StimulusSignalType" type="Signal_Type">       <xs:annotation>         <xs:documentation>Stimulus signal is the sound being presented to the patient, in the ear being tested, that you want them to respond to. (e.g. Pure Tone) Please note, for ResidualInhibition, the patient is submitted to a masking signal on the ear being tested. In this case the StimulusSignalType must be set in accordance to that masking signal. </xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusSignalOutput" type="SignalOutput_Type">       <xs:annotation>         <xs:documentation>This refers to the method used to deliver the sound the patient responds to.  The ear and way the sound is delivered is specified but not the exact device used to deliver that sound (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MaskingSignalType" type="Signal_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>This is a sound used to stop the hearing in an ear that is not being tested from picking up the test signal. Often used when one ear is found to be significantly poorer than the other or for bone conduction testing. The non test ear picking up the test tone is called crossover. Masking is presented to the non test ear.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MaskingUnit" type="SignalUnit_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The unit used for the masking signal.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MaskingSignalOutput" type="SignalOutput_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>This refers to the method used to deliver the masking sound to the patient. The ear and way the sound is delivered is specified but not the exact device used to deliver that sound. (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusTransducerType" type="Transducer_Type" default="NoTransducer" minOccurs="0">       <xs:annotation>         <xs:documentation>The device used to deliver sound to the test ear. See annotations for Transducer_Type for more information</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MaskingTransducerType" type="Transducer_Type" default="NoTransducer" minOccurs="0">       <xs:annotation>         <xs:documentation>The device used to deliver sound to the non test ear. See annotations for Transducer_Type for more information</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusTransducerDescription" default="" minOccurs="0">       <xs:annotation>         <xs:documentation>Optional description of the Transducer</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="255"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingTransducerDescription" default="" minOccurs="0">       <xs:annotation>         <xs:documentation>Optional description of the Transducer</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="255"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="StimulusAmplitudeModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>The amplitude of the basic tone is modulated to produce a warble sound. Measurement conditions typically used with DifferenceLimenIntensity.</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:fractionDigits value="1"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingAmplitudeModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>Masking Amplitude Modulation is typically not used</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:fractionDigits value="1"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="StimulusBandwidthModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>TBD! </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:fractionDigits value="1"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingBandwidthModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>TBD! </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:fractionDigits value="1"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="StimulusFrequencyModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>The frequency of the basic tone is modulated by a lower frequency to produce a warble sound. Measurement conditions typically used with DifferenceLimenFrequency</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minInclusive value="0.00"/>           <xs:fractionDigits value="2"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingFrequencyModulation" minOccurs="0">       <xs:annotation>         <xs:documentation>Masking Frequency Modulation is typically not used.</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minInclusive value="0.00"/>           <xs:fractionDigits value="2"/>         </xs:restriction>       </xs:simpleType>     </xs:element>   </xs:sequence> </xs:complexType>

element MeasurementConditions_Type/StimulusSignalType

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Signal_Type
properties	isRef  0 content  complex
children	Signal_Types OtherSignalSpecification
annotation	documentation Stimulus signal is the sound being presented to the patient, in the ear being tested, that you want them to respond to. (e.g. Pure Tone) Please note, for ResidualInhibition, the patient is submitted to a masking signal on the ear being tested. In this case the StimulusSignalType must be set in accordance to that masking signal.
source	<xs:element name="StimulusSignalType" type="Signal_Type">   <xs:annotation>     <xs:documentation>Stimulus signal is the sound being presented to the patient, in the ear being tested, that you want them to respond to. (e.g. Pure Tone) Please note, for ResidualInhibition, the patient is submitted to a masking signal on the ear being tested. In this case the StimulusSignalType must be set in accordance to that masking signal. </xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/StimulusSignalOutput

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	SignalOutput_Type
properties	isRef  0 content  simple
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoSignalOutput  enumeration  AirConductorLeft  enumeration  AirConductorRight  enumeration  AirConductorBinaural  enumeration  BoneConductorLeft  enumeration  BoneConductorRight  enumeration  BoneConductorBinaural  enumeration  FreeFieldLeft  enumeration  FreeFieldRight  enumeration  FreeFieldBinaural  enumeration  InsertPhoneLeft  enumeration  InsertPhoneRight  enumeration  InsertPhoneBinaural
annotation	documentation This refers to the method used to deliver the sound the patient responds to.  The ear and way the sound is delivered is specified but not the exact device used to deliver that sound (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information
source	<xs:element name="StimulusSignalOutput" type="SignalOutput_Type">   <xs:annotation>     <xs:documentation>This refers to the method used to deliver the sound the patient responds to.  The ear and way the sound is delivered is specified but not the exact device used to deliver that sound (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/MaskingSignalType

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Signal_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	Signal_Types OtherSignalSpecification
annotation	documentation This is a sound used to stop the hearing in an ear that is not being tested from picking up the test signal. Often used when one ear is found to be significantly poorer than the other or for bone conduction testing. The non test ear picking up the test tone is called crossover. Masking is presented to the non test ear.
source	<xs:element name="MaskingSignalType" type="Signal_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>This is a sound used to stop the hearing in an ear that is not being tested from picking up the test signal. Often used when one ear is found to be significantly poorer than the other or for bone conduction testing. The non test ear picking up the test tone is called crossover. Masking is presented to the non test ear.</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/MaskingUnit

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	SignalUnit_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  HL  enumeration  SL  enumeration  SPL  enumeration  ABS
annotation	documentation The unit used for the masking signal.
source	<xs:element name="MaskingUnit" type="SignalUnit_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The unit used for the masking signal.</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/MaskingSignalOutput

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	SignalOutput_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoSignalOutput  enumeration  AirConductorLeft  enumeration  AirConductorRight  enumeration  AirConductorBinaural  enumeration  BoneConductorLeft  enumeration  BoneConductorRight  enumeration  BoneConductorBinaural  enumeration  FreeFieldLeft  enumeration  FreeFieldRight  enumeration  FreeFieldBinaural  enumeration  InsertPhoneLeft  enumeration  InsertPhoneRight  enumeration  InsertPhoneBinaural
annotation	documentation This refers to the method used to deliver the masking sound to the patient. The ear and way the sound is delivered is specified but not the exact device used to deliver that sound. (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information
source	<xs:element name="MaskingSignalOutput" type="SignalOutput_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>This refers to the method used to deliver the masking sound to the patient. The ear and way the sound is delivered is specified but not the exact device used to deliver that sound. (e.g. left air conduction not TDH39) See annotations for SignalOutput_Type for more information</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/StimulusTransducerType

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Transducer_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple default  NoTransducer
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoTransducer  enumeration  Other  enumeration  HearingInstrument  enumeration  TDH39  enumeration  HDA200  enumeration  EARTONE3A  enumeration  DT48  enumeration  TDH49  enumeration  B71  enumeration  B72  enumeration  Beoton  enumeration  Holmberg  enumeration  EARTONE5A  enumeration  Eartone3A-ABR  enumeration  TDH50  enumeration  IP30  enumeration  IP30_10Ohm  enumeration  IP30_50Ohm  enumeration  DD45  enumeration  DD450  enumeration  B81  enumeration  DD65  enumeration  DD65v2  enumeration  Holmco_PD81  enumeration  Holmco_PD95  enumeration  HDA280  enumeration  HDA300  enumeration  BC-1  enumeration  BC-2
annotation	documentation The device used to deliver sound to the test ear. See annotations for Transducer_Type for more information
source	<xs:element name="StimulusTransducerType" type="Transducer_Type" default="NoTransducer" minOccurs="0">   <xs:annotation>     <xs:documentation>The device used to deliver sound to the test ear. See annotations for Transducer_Type for more information</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/MaskingTransducerType

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Transducer_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple default  NoTransducer
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoTransducer  enumeration  Other  enumeration  HearingInstrument  enumeration  TDH39  enumeration  HDA200  enumeration  EARTONE3A  enumeration  DT48  enumeration  TDH49  enumeration  B71  enumeration  B72  enumeration  Beoton  enumeration  Holmberg  enumeration  EARTONE5A  enumeration  Eartone3A-ABR  enumeration  TDH50  enumeration  IP30  enumeration  IP30_10Ohm  enumeration  IP30_50Ohm  enumeration  DD45  enumeration  DD450  enumeration  B81  enumeration  DD65  enumeration  DD65v2  enumeration  Holmco_PD81  enumeration  Holmco_PD95  enumeration  HDA280  enumeration  HDA300  enumeration  BC-1  enumeration  BC-2
annotation	documentation The device used to deliver sound to the non test ear. See annotations for Transducer_Type for more information
source	<xs:element name="MaskingTransducerType" type="Transducer_Type" default="NoTransducer" minOccurs="0">   <xs:annotation>     <xs:documentation>The device used to deliver sound to the non test ear. See annotations for Transducer_Type for more information</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementConditions_Type/StimulusTransducerDescription

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple default  <empty>
facets	Kind  Value  annotation  maxLength  255
annotation	documentation Optional description of the Transducer
source	<xs:element name="StimulusTransducerDescription" default="" minOccurs="0">   <xs:annotation>     <xs:documentation>Optional description of the Transducer</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="255"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/MaskingTransducerDescription

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple default  <empty>
facets	Kind  Value  annotation  maxLength  255
annotation	documentation Optional description of the Transducer
source	<xs:element name="MaskingTransducerDescription" default="" minOccurs="0">   <xs:annotation>     <xs:documentation>Optional description of the Transducer</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="255"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/StimulusAmplitudeModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  fractionDigits  1
annotation	documentation The amplitude of the basic tone is modulated to produce a warble sound. Measurement conditions typically used with DifferenceLimenIntensity.
source	<xs:element name="StimulusAmplitudeModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>The amplitude of the basic tone is modulated to produce a warble sound. Measurement conditions typically used with DifferenceLimenIntensity.</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:fractionDigits value="1"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/MaskingAmplitudeModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  fractionDigits  1
annotation	documentation Masking Amplitude Modulation is typically not used
source	<xs:element name="MaskingAmplitudeModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>Masking Amplitude Modulation is typically not used</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:fractionDigits value="1"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/StimulusBandwidthModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  fractionDigits  1
annotation	documentation TBD!
source	<xs:element name="StimulusBandwidthModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>TBD! </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:fractionDigits value="1"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/MaskingBandwidthModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  fractionDigits  1
annotation	documentation TBD!
source	<xs:element name="MaskingBandwidthModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>TBD! </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:fractionDigits value="1"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/StimulusFrequencyModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minInclusive  0.00  fractionDigits  2
annotation	documentation The frequency of the basic tone is modulated by a lower frequency to produce a warble sound. Measurement conditions typically used with DifferenceLimenFrequency
source	<xs:element name="StimulusFrequencyModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>The frequency of the basic tone is modulated by a lower frequency to produce a warble sound. Measurement conditions typically used with DifferenceLimenFrequency</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minInclusive value="0.00"/>       <xs:fractionDigits value="2"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementConditions_Type/MaskingFrequencyModulation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minInclusive  0.00  fractionDigits  2
annotation	documentation Masking Frequency Modulation is typically not used.
source	<xs:element name="MaskingFrequencyModulation" minOccurs="0">   <xs:annotation>     <xs:documentation>Masking Frequency Modulation is typically not used.</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minInclusive value="0.00"/>       <xs:fractionDigits value="2"/>     </xs:restriction>   </xs:simpleType> </xs:element>

complexType MeasurementEquipment_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	AudiometerMakeModel AudiometerSerialNumber AudiometerLastCalibrationDate
used by	element  TinnitusMeasurementData/TinnitusMeasurementEquipment
annotation	documentation The Measurement equipment used for the Tinnitus Measurement.
source	<xs:complexType name="MeasurementEquipment_Type">   <xs:annotation>     <xs:documentation>The Measurement equipment used for the Tinnitus Measurement. </xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="AudiometerMakeModel" minOccurs="0">       <xs:annotation>         <xs:documentation>The Manufacturer Make Model of the equipment used.</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="255"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="AudiometerSerialNumber" minOccurs="0">       <xs:annotation>         <xs:documentation>The Serial Number of the equipment used.</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="41"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="AudiometerLastCalibrationDate" type="xs:dateTime" minOccurs="0">       <xs:annotation>         <xs:documentation>Date of Last Calibration of the equipment used.</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element MeasurementEquipment_Type/AudiometerMakeModel

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  maxLength  255
annotation	documentation The Manufacturer Make Model of the equipment used.
source	<xs:element name="AudiometerMakeModel" minOccurs="0">   <xs:annotation>     <xs:documentation>The Manufacturer Make Model of the equipment used.</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="255"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementEquipment_Type/AudiometerSerialNumber

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  maxLength  41
annotation	documentation The Serial Number of the equipment used.
source	<xs:element name="AudiometerSerialNumber" minOccurs="0">   <xs:annotation>     <xs:documentation>The Serial Number of the equipment used.</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="41"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementEquipment_Type/AudiometerLastCalibrationDate

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	xs:dateTime
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
annotation	documentation Date of Last Calibration of the equipment used.
source	<xs:element name="AudiometerLastCalibrationDate" type="xs:dateTime" minOccurs="0">   <xs:annotation>     <xs:documentation>Date of Last Calibration of the equipment used.</xs:documentation>   </xs:annotation> </xs:element>

complexType MeasurementFrequencyPoint_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	StimulusFrequency StimulusIntensity StimulusBandwidth StimulusPulseDuration MaskingFrequency MaskingIntensity
used by	element  TinnitusPitchMatch_Type/MeasurementPoint
annotation	documentation Measurement Point with Frequency and optional Intensity, bandwidth and pulseDuration.
source	<xs:complexType name="MeasurementFrequencyPoint_Type">   <xs:annotation>     <xs:documentation>Measurement Point with Frequency and optional Intensity, bandwidth and pulseDuration.</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="StimulusFrequency">       <xs:annotation>         <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="StimulusIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">       <xs:annotation>         <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusBandwidth" type="Bandwidth_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The width of the shaped noise defined by upper and lower limits in Hz. Center of noise defined in frequency and level in intensity.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusPulseDuration" minOccurs="0">       <xs:annotation>         <xs:documentation>Duration of acoustic signal when using pulsed stimuli in seconds. </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingFrequency" minOccurs="0">       <xs:annotation>         <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">       <xs:annotation>         <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element MeasurementFrequencyPoint_Type/StimulusFrequency

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:integer
properties	isRef  0 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The frequency at which the measurement was done. ##freq##
source	<xs:element name="StimulusFrequency">   <xs:annotation>     <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementFrequencyPoint_Type/StimulusIntensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Intensity_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	Intensity Unit
annotation	documentation The signal intensity and unit used for the stimulus signals.
source	<xs:element name="StimulusIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementFrequencyPoint_Type/StimulusBandwidth

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Bandwidth_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	UpperLimit UpperSlope PlateauSlope LowerLimit LowerSlope
annotation	documentation The width of the shaped noise defined by upper and lower limits in Hz. Center of noise defined in frequency and level in intensity.
source	<xs:element name="StimulusBandwidth" type="Bandwidth_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The width of the shaped noise defined by upper and lower limits in Hz. Center of noise defined in frequency and level in intensity.</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementFrequencyPoint_Type/StimulusPulseDuration

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation Duration of acoustic signal when using pulsed stimuli in seconds.
source	<xs:element name="StimulusPulseDuration" minOccurs="0">   <xs:annotation>     <xs:documentation>Duration of acoustic signal when using pulsed stimuli in seconds. </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementFrequencyPoint_Type/MaskingFrequency

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:integer
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The frequency at which the measurement was done. ##freq##
source	<xs:element name="MaskingFrequency" minOccurs="0">   <xs:annotation>     <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementFrequencyPoint_Type/MaskingIntensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Intensity_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	Intensity Unit
annotation	documentation The signal intensity and unit used for the stimulus signals.
source	<xs:element name="MaskingIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>   </xs:annotation> </xs:element>

complexType MeasurementIntensityPoint_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	StimulusIntensity StimulusFrequency MaskingFrequency MaskingIntensity
used by	elements  TinnitusLoudnessMatch_Type/MeasurementPoint MinimumMaskingLevel_Type/MeasurementPoint ResidualInhibition_Type/SignalIntensity
annotation	documentation Measurement Point with Intensity and optional Frequency, bandwidth and pulseDuration.
source	<xs:complexType name="MeasurementIntensityPoint_Type">   <xs:annotation>     <xs:documentation>Measurement Point with Intensity and optional Frequency, bandwidth and pulseDuration.</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="StimulusIntensity" type="Intensity_Type" maxOccurs="unbounded">       <xs:annotation>         <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusFrequency" minOccurs="0">       <xs:annotation>         <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingFrequency" minOccurs="0">       <xs:annotation>         <xs:documentation>The frequency at which the masking was done. ##freq## </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="MaskingIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">       <xs:annotation>         <xs:documentation>The signal intensity and unit used for the masking signal.</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element MeasurementIntensityPoint_Type/StimulusIntensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Intensity_Type
properties	isRef  0 minOcc  1 maxOcc  unbounded content  complex
children	Intensity Unit
annotation	documentation The signal intensity and unit used for the stimulus signals.
source	<xs:element name="StimulusIntensity" type="Intensity_Type" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>The signal intensity and unit used for the stimulus signals.</xs:documentation>   </xs:annotation> </xs:element>

element MeasurementIntensityPoint_Type/StimulusFrequency

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:integer
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The frequency at which the measurement was done. ##freq##
source	<xs:element name="StimulusFrequency" minOccurs="0">   <xs:annotation>     <xs:documentation>The frequency at which the measurement was done. ##freq## </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementIntensityPoint_Type/MaskingFrequency

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:integer
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The frequency at which the masking was done. ##freq##
source	<xs:element name="MaskingFrequency" minOccurs="0">   <xs:annotation>     <xs:documentation>The frequency at which the masking was done. ##freq## </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element MeasurementIntensityPoint_Type/MaskingIntensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	Intensity_Type
properties	isRef  0 minOcc  0 maxOcc  unbounded content  complex
children	Intensity Unit
annotation	documentation The signal intensity and unit used for the masking signal.
source	<xs:element name="MaskingIntensity" type="Intensity_Type" minOccurs="0" maxOccurs="unbounded">   <xs:annotation>     <xs:documentation>The signal intensity and unit used for the masking signal.</xs:documentation>   </xs:annotation> </xs:element>

complexType MinimumMaskingLevel_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	MeasurementConditions MeasurementPoint MatchingSuccess
used by	element  TinnitusMeasurementData/MinimumMaskingLevel
annotation	documentation (MML). Test attempt to determine the lowest level at which a standard band of noise "covered" the tinnitus
source	<xs:complexType name="MinimumMaskingLevel_Type">   <xs:annotation>     <xs:documentation>(MML). Test attempt to determine the lowest level at which a standard band of noise "covered" the tinnitus</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>Measurement Conditions for the Minimum Masking Level measurement</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MeasurementPoint" type="MeasurementIntensityPoint_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The Minimum Masking Level point</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The sucess of masking</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element MinimumMaskingLevel_Type/MeasurementConditions

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementConditions_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusSignalType StimulusSignalOutput MaskingSignalType MaskingUnit MaskingSignalOutput StimulusTransducerType MaskingTransducerType StimulusTransducerDescription MaskingTransducerDescription StimulusAmplitudeModulation MaskingAmplitudeModulation StimulusBandwidthModulation MaskingBandwidthModulation StimulusFrequencyModulation MaskingFrequencyModulation
annotation	documentation Measurement Conditions for the Minimum Masking Level measurement
source	<xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>Measurement Conditions for the Minimum Masking Level measurement</xs:documentation>   </xs:annotation> </xs:element>

element MinimumMaskingLevel_Type/MeasurementPoint

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementIntensityPoint_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusIntensity StimulusFrequency MaskingFrequency MaskingIntensity
annotation	documentation The Minimum Masking Level point
source	<xs:element name="MeasurementPoint" type="MeasurementIntensityPoint_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The Minimum Masking Level point</xs:documentation>   </xs:annotation> </xs:element>

element MinimumMaskingLevel_Type/MatchingSuccess

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusMatchSucess_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation The sucess of masking
source	<xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The sucess of masking</xs:documentation>   </xs:annotation> </xs:element>

complexType ResidualInhibition_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	MeasurementConditions SignalIntensity StimulusExposureTime InhibitionTime PulseDuration GapDuration NumberOfCycles InhibitionSuccess PerceptionLocation
used by	element  TinnitusMeasurementData/ResidualInhibition
annotation	documentation Tinnitus loudness suppression after exposure to a stimulus
source	<xs:complexType name="ResidualInhibition_Type">   <xs:annotation>     <xs:documentation>Tinnitus loudness suppression after exposure to a stimulus</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>Measurement Conditions for the Residual Inhibition measurement</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="SignalIntensity" type="MeasurementIntensityPoint_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The Stimulus Signal Level and frequescy used for Residual Inhibition measurements. Here the Signal is used to mask the tinnitus. Optional masking can be applied to the other ear.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="StimulusExposureTime" minOccurs="0">       <xs:annotation>         <xs:documentation>The time, in seconds, the patient is exposed to the stimulus signal</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="InhibitionTime" minOccurs="0">       <xs:annotation>         <xs:documentation>The time, in seconds, the masking is effective after it has been turned off</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="PulseDuration" minOccurs="0">       <xs:annotation>         <xs:documentation>Duration of acoustic signal when using pulsed stimuli in seconds. </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="GapDuration" minOccurs="0">       <xs:annotation>         <xs:documentation>the silence interval between the acoustic pulses in seconds</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:decimal">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="NumberOfCycles" minOccurs="0">       <xs:annotation>         <xs:documentation>The time, in seconds, the masking is effective after it has been turned off</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:integer">           <xs:minExclusive value="0"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="InhibitionSuccess" type="TinnitusInhibitionSucess_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The sucess of Inhibition when applying masking</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="PerceptionLocation" type="TinnitusPerceptionLocation_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The percieved location of tinnitus</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element ResidualInhibition_Type/MeasurementConditions

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementConditions_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusSignalType StimulusSignalOutput MaskingSignalType MaskingUnit MaskingSignalOutput StimulusTransducerType MaskingTransducerType StimulusTransducerDescription MaskingTransducerDescription StimulusAmplitudeModulation MaskingAmplitudeModulation StimulusBandwidthModulation MaskingBandwidthModulation StimulusFrequencyModulation MaskingFrequencyModulation
annotation	documentation Measurement Conditions for the Residual Inhibition measurement
source	<xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>Measurement Conditions for the Residual Inhibition measurement</xs:documentation>   </xs:annotation> </xs:element>

element ResidualInhibition_Type/SignalIntensity

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementIntensityPoint_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusIntensity StimulusFrequency MaskingFrequency MaskingIntensity
annotation	documentation The Stimulus Signal Level and frequescy used for Residual Inhibition measurements. Here the Signal is used to mask the tinnitus. Optional masking can be applied to the other ear.
source	<xs:element name="SignalIntensity" type="MeasurementIntensityPoint_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The Stimulus Signal Level and frequescy used for Residual Inhibition measurements. Here the Signal is used to mask the tinnitus. Optional masking can be applied to the other ear.</xs:documentation>   </xs:annotation> </xs:element>

element ResidualInhibition_Type/StimulusExposureTime

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The time, in seconds, the patient is exposed to the stimulus signal
source	<xs:element name="StimulusExposureTime" minOccurs="0">   <xs:annotation>     <xs:documentation>The time, in seconds, the patient is exposed to the stimulus signal</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element ResidualInhibition_Type/InhibitionTime

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The time, in seconds, the masking is effective after it has been turned off
source	<xs:element name="InhibitionTime" minOccurs="0">   <xs:annotation>     <xs:documentation>The time, in seconds, the masking is effective after it has been turned off</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element ResidualInhibition_Type/PulseDuration

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation Duration of acoustic signal when using pulsed stimuli in seconds.
source	<xs:element name="PulseDuration" minOccurs="0">   <xs:annotation>     <xs:documentation>Duration of acoustic signal when using pulsed stimuli in seconds. </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element ResidualInhibition_Type/GapDuration

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:decimal
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation the silence interval between the acoustic pulses in seconds
source	<xs:element name="GapDuration" minOccurs="0">   <xs:annotation>     <xs:documentation>the silence interval between the acoustic pulses in seconds</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:decimal">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element ResidualInhibition_Type/NumberOfCycles

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:integer
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  minExclusive  0
annotation	documentation The time, in seconds, the masking is effective after it has been turned off
source	<xs:element name="NumberOfCycles" minOccurs="0">   <xs:annotation>     <xs:documentation>The time, in seconds, the masking is effective after it has been turned off</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:integer">       <xs:minExclusive value="0"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element ResidualInhibition_Type/InhibitionSuccess

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusInhibitionSucess_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  Combination  enumeration  Exacerbation  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation The sucess of Inhibition when applying masking
source	<xs:element name="InhibitionSuccess" type="TinnitusInhibitionSucess_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The sucess of Inhibition when applying masking</xs:documentation>   </xs:annotation> </xs:element>

element ResidualInhibition_Type/PerceptionLocation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusPerceptionLocation_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Central  documentation Central / Tinnitus is percived centrally in the head.      enumeration  Binaural  documentation Binaural / Tinnitus is percived in both ears not central. enumeration  MonauralRight  documentation MonArualRight / Tinnitus is percived in the right side of the head.      enumeration  MonauralLeft  documentation MonarualLeft / Tinnitus is percived in the right side of the head. enumeration  VariableLocation  documentation Tinnitus is percived in variable location enumeration  Unknown  documentation Tinnitus perception location cannot be decided
annotation	documentation The percieved location of tinnitus
source	<xs:element name="PerceptionLocation" type="TinnitusPerceptionLocation_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The percieved location of tinnitus</xs:documentation>   </xs:annotation> </xs:element>

complexType Signal_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	Signal_Types OtherSignalSpecification
used by	elements  MeasurementConditions_Type/MaskingSignalType MeasurementConditions_Type/StimulusSignalType
annotation	documentation The type of Signal used in the measurement.
source	<xs:complexType name="Signal_Type">   <xs:annotation>     <xs:documentation>The type of Signal used in the measurement. </xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="Signal_Types">       <xs:annotation>         <xs:documentation>The Other type should be specified in the OtherSignalType element. </xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:annotation>           <xs:documentation>The type of Signal used in the measurement. The Other type should be specified in the OtherSignalType element. </xs:documentation>         </xs:annotation>         <xs:restriction base="xs:NMTOKEN">           <xs:enumeration value="Undefined">             <xs:annotation>               <xs:documentation>Unknown or unlisted signal type</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="NoSignal">             <xs:annotation>               <xs:documentation>No signal applied</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Tone">             <xs:annotation>               <xs:documentation>Sinusoidal tone</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Warble">             <xs:annotation>               <xs:documentation/>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="NarrowBandNoise">             <xs:annotation>               <xs:documentation>Narrow Band Noise</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="TwoTone"/>           <xs:enumeration value="WhiteNoise">             <xs:annotation>               <xs:documentation>white noise, constant power spectral density</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="PinkNoise">             <xs:annotation>               <xs:documentation>Pink Noise, each octave have an equal amount of noise power</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="RainbowPassage">             <xs:annotation>               <xs:documentation>Rainbow Passage signal</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="SpeechNoise">             <xs:annotation>               <xs:documentation>Speech with Noise</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="SpeechLike">             <xs:annotation>               <xs:documentation>Speech Like signal</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="LoudSpeech">             <xs:annotation>               <xs:documentation>Loud Speech</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="OwnVoice">             <xs:annotation>               <xs:documentation>Patients own voice</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra2pb1f1mn">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology,  2 persons babble, 1 female, 1 male, Normal effort.</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra3bsmnfn">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Female weighted, Normal effort.</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra3bsmnmn">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Male weighted, Normal effort.</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra6pbl">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Loud effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra6pbn">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Normal effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Icra6pbr">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Raised effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="IcraUrgnml">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Loud effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="IcraUrgnmn">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Normal effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="IcraUrgnmr">             <xs:annotation>               <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Raised effort</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="SpeechNoiseILTASS">             <xs:annotation>               <xs:documentation>Speech Noise, the international long-term average speech spectrum </xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Aurins">             <xs:annotation>               <xs:documentation/>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="ISTS">             <xs:annotation>               <xs:documentation>International Speech Test Signal</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="EUHA-MPO">             <xs:annotation>               <xs:documentation>ISTS presented at 55 dB SPL together with short, loud sequential sinusoids.</xs:documentation>             </xs:annotation>           </xs:enumeration>           <xs:enumeration value="Other"/>         </xs:restriction>       </xs:simpleType>     </xs:element>     <xs:element name="OtherSignalSpecification" minOccurs="0">       <xs:annotation>         <xs:documentation>Description of the Signal used when referring to "Other" signal type.</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="255"/>         </xs:restriction>       </xs:simpleType>     </xs:element>   </xs:sequence> </xs:complexType>

element Signal_Type/Signal_Types

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	isRef  0 content  simple
facets	Kind  Value  annotation  enumeration  Undefined  documentation Unknown or unlisted signal type enumeration  NoSignal  documentation No signal applied enumeration  Tone  documentation Sinusoidal tone enumeration  Warble  enumeration  NarrowBandNoise  documentation Narrow Band Noise enumeration  TwoTone  enumeration  WhiteNoise  documentation white noise, constant power spectral density enumeration  PinkNoise  documentation Pink Noise, each octave have an equal amount of noise power enumeration  RainbowPassage  documentation Rainbow Passage signal enumeration  SpeechNoise  documentation Speech with Noise enumeration  SpeechLike  documentation Speech Like signal enumeration  LoudSpeech  documentation Loud Speech enumeration  OwnVoice  documentation Patients own voice enumeration  Icra2pb1f1mn  documentation International Collegium of Rehabilitative Audiology,  2 persons babble, 1 female, 1 male, Normal effort. enumeration  Icra3bsmnfn  documentation International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Female weighted, Normal effort. enumeration  Icra3bsmnmn  documentation International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Male weighted, Normal effort. enumeration  Icra6pbl  documentation International Collegium of Rehabilitative Audiology, 6 persons babble, Loud effort enumeration  Icra6pbn  documentation International Collegium of Rehabilitative Audiology, 6 persons babble, Normal effort enumeration  Icra6pbr  documentation International Collegium of Rehabilitative Audiology, 6 persons babble, Raised effort enumeration  IcraUrgnml  documentation International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Loud effort enumeration  IcraUrgnmn  documentation International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Normal effort enumeration  IcraUrgnmr  documentation International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Raised effort enumeration  SpeechNoiseILTASS  documentation Speech Noise, the international long-term average speech spectrum enumeration  Aurins  enumeration  ISTS  documentation International Speech Test Signal enumeration  EUHA-MPO  documentation ISTS presented at 55 dB SPL together with short, loud sequential sinusoids. enumeration  Other
annotation	documentation The Other type should be specified in the OtherSignalType element.
source	<xs:element name="Signal_Types">   <xs:annotation>     <xs:documentation>The Other type should be specified in the OtherSignalType element. </xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:annotation>       <xs:documentation>The type of Signal used in the measurement. The Other type should be specified in the OtherSignalType element. </xs:documentation>     </xs:annotation>     <xs:restriction base="xs:NMTOKEN">       <xs:enumeration value="Undefined">         <xs:annotation>           <xs:documentation>Unknown or unlisted signal type</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="NoSignal">         <xs:annotation>           <xs:documentation>No signal applied</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Tone">         <xs:annotation>           <xs:documentation>Sinusoidal tone</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Warble">         <xs:annotation>           <xs:documentation/>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="NarrowBandNoise">         <xs:annotation>           <xs:documentation>Narrow Band Noise</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="TwoTone"/>       <xs:enumeration value="WhiteNoise">         <xs:annotation>           <xs:documentation>white noise, constant power spectral density</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="PinkNoise">         <xs:annotation>           <xs:documentation>Pink Noise, each octave have an equal amount of noise power</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="RainbowPassage">         <xs:annotation>           <xs:documentation>Rainbow Passage signal</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="SpeechNoise">         <xs:annotation>           <xs:documentation>Speech with Noise</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="SpeechLike">         <xs:annotation>           <xs:documentation>Speech Like signal</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="LoudSpeech">         <xs:annotation>           <xs:documentation>Loud Speech</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="OwnVoice">         <xs:annotation>           <xs:documentation>Patients own voice</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra2pb1f1mn">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology,  2 persons babble, 1 female, 1 male, Normal effort.</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra3bsmnfn">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Female weighted, Normal effort.</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra3bsmnmn">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, 3 band speech modulated noise, Male weighted, Normal effort.</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra6pbl">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Loud effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra6pbn">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Normal effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Icra6pbr">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, 6 persons babble, Raised effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="IcraUrgnml">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Loud effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="IcraUrgnmn">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Normal effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="IcraUrgnmr">         <xs:annotation>           <xs:documentation>International Collegium of Rehabilitative Audiology, Unmodulated random gaussian noise. Male weighted, Raised effort</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="SpeechNoiseILTASS">         <xs:annotation>           <xs:documentation>Speech Noise, the international long-term average speech spectrum </xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Aurins">         <xs:annotation>           <xs:documentation/>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="ISTS">         <xs:annotation>           <xs:documentation>International Speech Test Signal</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="EUHA-MPO">         <xs:annotation>           <xs:documentation>ISTS presented at 55 dB SPL together with short, loud sequential sinusoids.</xs:documentation>         </xs:annotation>       </xs:enumeration>       <xs:enumeration value="Other"/>     </xs:restriction>   </xs:simpleType> </xs:element>

element Signal_Type/OtherSignalSpecification

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  maxLength  255
annotation	documentation Description of the Signal used when referring to "Other" signal type.
source	<xs:element name="OtherSignalSpecification" minOccurs="0">   <xs:annotation>     <xs:documentation>Description of the Signal used when referring to "Other" signal type.</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="255"/>     </xs:restriction>   </xs:simpleType> </xs:element>

complexType TinnitusLoudnessMatch_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	MeasurementConditions MeasurementPoint MatchingSuccess
used by	element  TinnitusMeasurementData/TinnitusLoudnessMatch
annotation	documentation (TLM) Test attempt to determine loudness of the tinnitus
source	<xs:complexType name="TinnitusLoudnessMatch_Type">   <xs:annotation>     <xs:documentation>(TLM) Test attempt to determine loudness of the tinnitus</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>Measurement Conditions for the Loudness Match measurement</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MeasurementPoint" type="MeasurementIntensityPoint_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The Loudness Match point</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The sucess of matching</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element TinnitusLoudnessMatch_Type/MeasurementConditions

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementConditions_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusSignalType StimulusSignalOutput MaskingSignalType MaskingUnit MaskingSignalOutput StimulusTransducerType MaskingTransducerType StimulusTransducerDescription MaskingTransducerDescription StimulusAmplitudeModulation MaskingAmplitudeModulation StimulusBandwidthModulation MaskingBandwidthModulation StimulusFrequencyModulation MaskingFrequencyModulation
annotation	documentation Measurement Conditions for the Loudness Match measurement
source	<xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>Measurement Conditions for the Loudness Match measurement</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusLoudnessMatch_Type/MeasurementPoint

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementIntensityPoint_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusIntensity StimulusFrequency MaskingFrequency MaskingIntensity
annotation	documentation The Loudness Match point
source	<xs:element name="MeasurementPoint" type="MeasurementIntensityPoint_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The Loudness Match point</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusLoudnessMatch_Type/MatchingSuccess

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusMatchSucess_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation The sucess of matching
source	<xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The sucess of matching</xs:documentation>   </xs:annotation> </xs:element>

complexType TinnitusMeasurementNotes_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	TinnitusPerceptionLocation TinnitusTemporalCharacteristic OtherMeasurementNotes
used by	element  TinnitusMeasurementData/TinnitusMeasurementNotes
annotation	documentation The Measurement Notes structure is designed to hold the general notes from the Tinnitus Measurement.
source	<xs:complexType name="TinnitusMeasurementNotes_Type">   <xs:annotation>     <xs:documentation>The Measurement Notes structure is designed to hold the general notes from the Tinnitus Measurement. </xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="TinnitusPerceptionLocation" type="TinnitusPerceptionLocation_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The perceived location of tinnitus</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="TinnitusTemporalCharacteristic" type="TinnitusTemporalCharacteristic_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The temporal characteristic of Tinnitus. How is the tinnitus experienced.</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="OtherMeasurementNotes" minOccurs="0">       <xs:annotation>         <xs:documentation>Other notes. Eg. Tinnitus etiology information</xs:documentation>       </xs:annotation>       <xs:simpleType>         <xs:restriction base="xs:string">           <xs:maxLength value="255"/>         </xs:restriction>       </xs:simpleType>     </xs:element>   </xs:sequence> </xs:complexType>

element TinnitusMeasurementNotes_Type/TinnitusPerceptionLocation

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusPerceptionLocation_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Central  documentation Central / Tinnitus is percived centrally in the head.      enumeration  Binaural  documentation Binaural / Tinnitus is percived in both ears not central. enumeration  MonauralRight  documentation MonArualRight / Tinnitus is percived in the right side of the head.      enumeration  MonauralLeft  documentation MonarualLeft / Tinnitus is percived in the right side of the head. enumeration  VariableLocation  documentation Tinnitus is percived in variable location enumeration  Unknown  documentation Tinnitus perception location cannot be decided
annotation	documentation The perceived location of tinnitus
source	<xs:element name="TinnitusPerceptionLocation" type="TinnitusPerceptionLocation_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The perceived location of tinnitus</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementNotes_Type/TinnitusTemporalCharacteristic

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusTemporalCharacteristic_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Steady  documentation Tinnitus is characterized as Steady sound      enumeration  Pulsatile  documentation Tinnitus is characterized as Pulsating enumeration  Fluctuating  documentation Tinnitus is characterized as Fluctuating but not pulsatile enumeration  Unknown  documentation Tinnitus characteristic cannot be decided
annotation	documentation The temporal characteristic of Tinnitus. How is the tinnitus experienced.
source	<xs:element name="TinnitusTemporalCharacteristic" type="TinnitusTemporalCharacteristic_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The temporal characteristic of Tinnitus. How is the tinnitus experienced.</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusMeasurementNotes_Type/OtherMeasurementNotes

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:string
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  maxLength  255
annotation	documentation Other notes. Eg. Tinnitus etiology information
source	<xs:element name="OtherMeasurementNotes" minOccurs="0">   <xs:annotation>     <xs:documentation>Other notes. Eg. Tinnitus etiology information</xs:documentation>   </xs:annotation>   <xs:simpleType>     <xs:restriction base="xs:string">       <xs:maxLength value="255"/>     </xs:restriction>   </xs:simpleType> </xs:element>

complexType TinnitusPitchMatch_Type

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
children	MeasurementConditions MeasurementPoint MatchingSuccess
used by	element  TinnitusMeasurementData/TinnitusPitchMatch
annotation	documentation (TPM) Test attempt to determine the frequency best matching the tinnitus
source	<xs:complexType name="TinnitusPitchMatch_Type">   <xs:annotation>     <xs:documentation>(TPM) Test attempt to determine the frequency best matching the tinnitus</xs:documentation>   </xs:annotation>   <xs:sequence>     <xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>Measurement Conditions for the Pitch Match measurement</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MeasurementPoint" type="MeasurementFrequencyPoint_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The Pitch Match point</xs:documentation>       </xs:annotation>     </xs:element>     <xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">       <xs:annotation>         <xs:documentation>The sucess of matching</xs:documentation>       </xs:annotation>     </xs:element>   </xs:sequence> </xs:complexType>

element TinnitusPitchMatch_Type/MeasurementConditions

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementConditions_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusSignalType StimulusSignalOutput MaskingSignalType MaskingUnit MaskingSignalOutput StimulusTransducerType MaskingTransducerType StimulusTransducerDescription MaskingTransducerDescription StimulusAmplitudeModulation MaskingAmplitudeModulation StimulusBandwidthModulation MaskingBandwidthModulation StimulusFrequencyModulation MaskingFrequencyModulation
annotation	documentation Measurement Conditions for the Pitch Match measurement
source	<xs:element name="MeasurementConditions" type="MeasurementConditions_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>Measurement Conditions for the Pitch Match measurement</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusPitchMatch_Type/MeasurementPoint

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	MeasurementFrequencyPoint_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  complex
children	StimulusFrequency StimulusIntensity StimulusBandwidth StimulusPulseDuration MaskingFrequency MaskingIntensity
annotation	documentation The Pitch Match point
source	<xs:element name="MeasurementPoint" type="MeasurementFrequencyPoint_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The Pitch Match point</xs:documentation>   </xs:annotation> </xs:element>

element TinnitusPitchMatch_Type/MatchingSuccess

diagram
namespace	http://www.himsa.com/measurement/Tinnitus/500
type	TinnitusMatchSucess_Type
properties	isRef  0 minOcc  0 maxOcc  1 content  simple
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation The sucess of matching
source	<xs:element name="MatchingSuccess" type="TinnitusMatchSucess_Type" minOccurs="0">   <xs:annotation>     <xs:documentation>The sucess of matching</xs:documentation>   </xs:annotation> </xs:element>

simpleType SignalOutput_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	elements  MeasurementConditions_Type/MaskingSignalOutput MeasurementConditions_Type/StimulusSignalOutput
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoSignalOutput  enumeration  AirConductorLeft  enumeration  AirConductorRight  enumeration  AirConductorBinaural  enumeration  BoneConductorLeft  enumeration  BoneConductorRight  enumeration  BoneConductorBinaural  enumeration  FreeFieldLeft  enumeration  FreeFieldRight  enumeration  FreeFieldBinaural  enumeration  InsertPhoneLeft  enumeration  InsertPhoneRight  enumeration  InsertPhoneBinaural
annotation	documentation The Signal Output Type defines the means of presenting sound to the patient: + Air Conductor / headphones + Bone conductor / vibrator placed on the mastoid (HOCA-5 page 10) + Free Field / Loudspeakers in a special test room + Insert Phone / small foam tips used to deliver air conduction test. It also defines which side (i.e. the persons left or right ear) is stimulated.
source	<xs:simpleType name="SignalOutput_Type">   <xs:annotation>     <xs:documentation>The Signal Output Type defines the means of presenting sound to the patient: + Air Conductor / headphones + Bone conductor / vibrator placed on the mastoid (HOCA-5 page 10) + Free Field / Loudspeakers in a special test room + Insert Phone / small foam tips used to deliver air conduction test. It also defines which side (i.e. the persons left or right ear) is stimulated.</xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Unknown"/>     <xs:enumeration value="NoSignalOutput"/>     <xs:enumeration value="AirConductorLeft"/>     <xs:enumeration value="AirConductorRight"/>     <xs:enumeration value="AirConductorBinaural"/>     <xs:enumeration value="BoneConductorLeft"/>     <xs:enumeration value="BoneConductorRight"/>     <xs:enumeration value="BoneConductorBinaural"/>     <xs:enumeration value="FreeFieldLeft"/>     <xs:enumeration value="FreeFieldRight"/>     <xs:enumeration value="FreeFieldBinaural"/>     <xs:enumeration value="InsertPhoneLeft"/>     <xs:enumeration value="InsertPhoneRight"/>     <xs:enumeration value="InsertPhoneBinaural"/>   </xs:restriction> </xs:simpleType>

simpleType SignalUnit_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	elements  MeasurementConditions_Type/MaskingUnit Intensity_Type/Unit
facets	Kind  Value  annotation  enumeration  HL  enumeration  SL  enumeration  SPL  enumeration  ABS
annotation	documentation The decibel scale is used to measure the level of sound presented to the ears relative to a reference point. HL - Hearing Level dB HL refers to the hearing ability of a person. Normal hearing is defined as 0 dB HL. SL - Sensation level SPL - Sound Pressure Level. dB SPL is the measured pressure relative to 20 micropascals. ABS / Absolute Value of a measurement without any corrections
source	<xs:simpleType name="SignalUnit_Type">   <xs:annotation>     <xs:documentation>The decibel scale is used to measure the level of sound presented to the ears relative to a reference point. HL - Hearing Level dB HL refers to the hearing ability of a person. Normal hearing is defined as 0 dB HL. SL - Sensation level SPL - Sound Pressure Level. dB SPL is the measured pressure relative to 20 micropascals. ABS / Absolute Value of a measurement without any corrections</xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="HL"/>     <xs:enumeration value="SL"/>     <xs:enumeration value="SPL"/>     <xs:enumeration value="ABS"/>   </xs:restriction> </xs:simpleType>

simpleType TinnitusInhibitionSucess_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	element  ResidualInhibition_Type/InhibitionSuccess
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  Combination  enumeration  Exacerbation  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation How is the inhibition by masking of tinnitus working
source	<xs:simpleType name="TinnitusInhibitionSucess_Type">   <xs:annotation>     <xs:documentation>How is the inhibition by masking of tinnitus working </xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Partial">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="Complete">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="Combination">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="Exacerbation">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="NoResponse">       <xs:annotation>         <xs:documentation>Reached the limits of equipment</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="CouldNotTest">       <xs:annotation/>     </xs:enumeration>   </xs:restriction> </xs:simpleType>

simpleType TinnitusMatchSucess_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	elements  TinnitusPitchMatch_Type/MatchingSuccess TinnitusLoudnessMatch_Type/MatchingSuccess MinimumMaskingLevel_Type/MatchingSuccess
facets	Kind  Value  annotation  enumeration  Partial  enumeration  Complete  enumeration  NoResponse  documentation Reached the limits of equipment enumeration  CouldNotTest
annotation	documentation How is the tinnitus matching working
source	<xs:simpleType name="TinnitusMatchSucess_Type">   <xs:annotation>     <xs:documentation>How is the tinnitus matching working </xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Partial">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="Complete">       <xs:annotation/>     </xs:enumeration>     <xs:enumeration value="NoResponse">       <xs:annotation>         <xs:documentation>Reached the limits of equipment</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="CouldNotTest">       <xs:annotation/>     </xs:enumeration>   </xs:restriction> </xs:simpleType>

simpleType TinnitusPerceptionLocation_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	elements  ResidualInhibition_Type/PerceptionLocation TinnitusMeasurementNotes_Type/TinnitusPerceptionLocation
facets	Kind  Value  annotation  enumeration  Central  documentation Central / Tinnitus is percived centrally in the head.      enumeration  Binaural  documentation Binaural / Tinnitus is percived in both ears not central. enumeration  MonauralRight  documentation MonArualRight / Tinnitus is percived in the right side of the head.      enumeration  MonauralLeft  documentation MonarualLeft / Tinnitus is percived in the right side of the head. enumeration  VariableLocation  documentation Tinnitus is percived in variable location enumeration  Unknown  documentation Tinnitus perception location cannot be decided
annotation	documentation The perception of the location of Tinnitus
source	<xs:simpleType name="TinnitusPerceptionLocation_Type">   <xs:annotation>     <xs:documentation>The perception of the location of Tinnitus</xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Central">       <xs:annotation>         <xs:documentation>Central / Tinnitus is percived centrally in the head.      </xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="Binaural">       <xs:annotation>         <xs:documentation>Binaural / Tinnitus is percived in both ears not central.</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="MonauralRight">       <xs:annotation>         <xs:documentation>MonArualRight / Tinnitus is percived in the right side of the head.      </xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="MonauralLeft">       <xs:annotation>         <xs:documentation>MonarualLeft / Tinnitus is percived in the right side of the head.</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="VariableLocation">       <xs:annotation>         <xs:documentation>Tinnitus is percived in variable location</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="Unknown">       <xs:annotation>         <xs:documentation>Tinnitus perception location cannot be decided</xs:documentation>       </xs:annotation>     </xs:enumeration>   </xs:restriction> </xs:simpleType>

simpleType TinnitusTemporalCharacteristic_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	element  TinnitusMeasurementNotes_Type/TinnitusTemporalCharacteristic
facets	Kind  Value  annotation  enumeration  Steady  documentation Tinnitus is characterized as Steady sound      enumeration  Pulsatile  documentation Tinnitus is characterized as Pulsating enumeration  Fluctuating  documentation Tinnitus is characterized as Fluctuating but not pulsatile enumeration  Unknown  documentation Tinnitus characteristic cannot be decided
annotation	documentation Record temporal characteristics of Tinnitus
source	<xs:simpleType name="TinnitusTemporalCharacteristic_Type">   <xs:annotation>     <xs:documentation>Record temporal characteristics of Tinnitus</xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Steady">       <xs:annotation>         <xs:documentation>Tinnitus is characterized as Steady sound      </xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="Pulsatile">       <xs:annotation>         <xs:documentation>Tinnitus is characterized as Pulsating </xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="Fluctuating">       <xs:annotation>         <xs:documentation>Tinnitus is characterized as Fluctuating but not pulsatile</xs:documentation>       </xs:annotation>     </xs:enumeration>     <xs:enumeration value="Unknown">       <xs:annotation>         <xs:documentation>Tinnitus characteristic cannot be decided</xs:documentation>       </xs:annotation>     </xs:enumeration>   </xs:restriction> </xs:simpleType>

simpleType Transducer_Type

namespace	http://www.himsa.com/measurement/Tinnitus/500
type	restriction of xs:NMTOKEN
properties	base  xs:NMTOKEN
used by	elements  MeasurementConditions_Type/MaskingTransducerType MeasurementConditions_Type/StimulusTransducerType
facets	Kind  Value  annotation  enumeration  Unknown  enumeration  NoTransducer  enumeration  Other  enumeration  HearingInstrument  enumeration  TDH39  enumeration  HDA200  enumeration  EARTONE3A  enumeration  DT48  enumeration  TDH49  enumeration  B71  enumeration  B72  enumeration  Beoton  enumeration  Holmberg  enumeration  EARTONE5A  enumeration  Eartone3A-ABR  enumeration  TDH50  enumeration  IP30  enumeration  IP30_10Ohm  enumeration  IP30_50Ohm  enumeration  DD45  enumeration  DD450  enumeration  B81  enumeration  DD65  enumeration  DD65v2  enumeration  Holmco_PD81  enumeration  Holmco_PD95  enumeration  HDA280  enumeration  HDA300  enumeration  BC-1  enumeration  BC-2
annotation	documentation The device used to deliver sound (e.g. type of headphone TDH39) A simple explanation for each type of device is provided below: + TDH39 / Supra aural headphones for air conduction tests + HDA200 / Supra aural headphones often used for extended high frequency air conduction testing + EarTone 3A / Insert earphones + DT48 / Supra aural headphones for air conduction tests + TDH49 /  Supra aural headphones for air conduction tests + B71 / Bone Conductor + B72 / Bone conductor + Beoton / specific set of headphones used with Beoton audiometers only + Holmberg / Supra aural headphones for air conduction tests usually used in noisier environments +EARTONE5A, +IP30,RadioEar  EARTONE3A version +TDH50, +Holmco_PD81, +Holmco_PD95, +DD45, RadioEar +DD65, RadioEar DD45 with Peltor +B81, RadioEar +HDA280 +Eartone3A-ABR  +HDA300 / Sennheiser (now EOL, but has been used in the current years) +IP30_10Ohm / ABR from RadioEar +IP30_50Ohm / ABR from RadioEar +DD65v2 / RadioEar +DD450 / RadioEar +TDH39 / Telephonics +BC-1 / Bone conducoter from BHM +BC-2 / Bone conducoter from BHM
source	<xs:simpleType name="Transducer_Type">   <xs:annotation>     <xs:documentation>The device used to deliver sound (e.g. type of headphone TDH39) A simple explanation for each type of device is provided below: + TDH39 / Supra aural headphones for air conduction tests + HDA200 / Supra aural headphones often used for extended high frequency air conduction testing + EarTone 3A / Insert earphones + DT48 / Supra aural headphones for air conduction tests + TDH49 /  Supra aural headphones for air conduction tests + B71 / Bone Conductor + B72 / Bone conductor + Beoton / specific set of headphones used with Beoton audiometers only + Holmberg / Supra aural headphones for air conduction tests usually used in noisier environments +EARTONE5A, +IP30,RadioEar  EARTONE3A version +TDH50, +Holmco_PD81, +Holmco_PD95, +DD45, RadioEar +DD65, RadioEar DD45 with Peltor +B81, RadioEar +HDA280 +Eartone3A-ABR  +HDA300 / Sennheiser (now EOL, but has been used in the current years) +IP30_10Ohm / ABR from RadioEar +IP30_50Ohm / ABR from RadioEar +DD65v2 / RadioEar +DD450 / RadioEar +TDH39 / Telephonics +BC-1 / Bone conducoter from BHM +BC-2 / Bone conducoter from BHM </xs:documentation>   </xs:annotation>   <xs:restriction base="xs:NMTOKEN">     <xs:enumeration value="Unknown"/>     <xs:enumeration value="NoTransducer"/>     <xs:enumeration value="Other"/>     <xs:enumeration value="HearingInstrument"/>     <xs:enumeration value="TDH39"/>     <xs:enumeration value="HDA200"/>     <xs:enumeration value="EARTONE3A"/>     <xs:enumeration value="DT48"/>     <xs:enumeration value="TDH49"/>     <xs:enumeration value="B71"/>     <xs:enumeration value="B72"/>     <xs:enumeration value="Beoton"/>     <xs:enumeration value="Holmberg"/>     <xs:enumeration value="EARTONE5A"/>     <xs:enumeration value="Eartone3A-ABR"/>     <xs:enumeration value="TDH50"/>     <xs:enumeration value="IP30"/>     <xs:enumeration value="IP30_10Ohm"/>     <xs:enumeration value="IP30_50Ohm"/>     <xs:enumeration value="DD45"/>     <xs:enumeration value="DD450"/>     <xs:enumeration value="B81"/>     <xs:enumeration value="DD65"/>     <xs:enumeration value="DD65v2"/>     <xs:enumeration value="Holmco_PD81"/>     <xs:enumeration value="Holmco_PD95"/>     <xs:enumeration value="HDA280"/>     <xs:enumeration value="HDA300"/>     <xs:enumeration value="BC-1"/>     <xs:enumeration value="BC-2"/>   </xs:restriction> </xs:simpleType>

XML Schema documentation generated by XMLSpy Schema Editor http://www.altova.com/xmlspy